View IM05CGR_427715.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

The Best Relaytion
IM Relay
IM Relay
Slim line AND low profile 2 pole telecom/signal relay, polarized Through Hole Types (THT), standard version with 5.08 mm, narrow version with 3.2 mm between the terminal rows or Surface Mount Type (SMT)
Relay types: Features - Telecom/signal relay (dry circuit, test access, ringing) - Slim line10 x 6 mm, 0.39 x 0.24 inch - Low profile 5.65 mm, 0.222 inch - Minimum board-space 60 mm2 - Switching current 2 A - 2 changeover contacts (2 form C / DPDT) - Bifurcated contacts, gold plated - High sensitivity results in low nominal power consumption 140 mW for non latching 100 mW for latching version - High surge capability (1.2/50 s and 10/700 s) meets Bellcore GR 1089, FCC Part 68 and ITU-T K20 1500 V between open contacts 2500 V between coil and contacts - High mechanical shock resistance up to 300 G functional up to 500 G survival Typical applications: - Communications equipment Linecard application - analog, ISDN, xDSL, PABX Voice over IP - Office and business equipment - Measurement and control equipment - Consumer electronics Set top boxes, HiFi - Medical equipment Options: Surge capability 2500 V between open contacts non-latching with 1 coil latching with 1 coil
CSA-C22.2 No. 14-95 File No. 169679-1079886 CSA-C22.2 No. 950-95 UL 508 File No. E111441 UL 1950 3rd ed.
CECC 16501-003 Insulation category: Supplementary insulation according IEC/EN 60950 and UL 1950 Working voltage 300 Vrms Mains supply voltage SMT: 250 Vrms THT: 200 Vrms Repetitive peak voltage 2500 V Pollution degree: External: 2 Internal: 1 Flammability classification: V-0 Maximum operating temperature: 85C QC 160501-CH0001 IEC/EN60950 IEC Ref. Cert. No. 1176
2
IM Relay
Dimensions
IM THT Standard IM THT Narrow IM SMT Gull Wings
inch
L W H T T1 T2 D1 D2 Tw S
10 0.08 6 0.08 5.65 -0.2 3.2 N/A 5.080.1 3.2 0.15 2.2 0.15 0.4 0.3 0.05
mm
0.393 0.003 0.236 0.003 0.222 -0.008 0.125 N/A 0.200 0.004 0.126 0.006 0.087 0.006 0.015 0.011 0.002
inch
10 0.08 5.7 0.3 5.85 -0.15 3.2 N/A 3.20.1 3.2 0.15 2.2 0.15 0.4 0.3 0.05
mm
0.393 0.003 10 0.08 0.224 0.012 6 0.08 0.230 -0.006 5.65 -0.2 0.125 N/A N/A 7.5 0.3 0.126 0.006 5.08 0.1 0.126 0.006 3.2 0.15 0.087 0.006 2.2 0.15 0.015 0.4 0.011 0.002 N/A
inch
mm
IM SMT J-Legs
0.393 0.003 0.236 0.003 0.222 -0.008 N/A 0.110 0.007 0.200 0.004 0.126 0.006 0.087 0.006 0.015 N/A
0.393 0.003 10 0.08 0.236 0.003 6 0.08 0.222 -0.008 5.65 -0.2 N/A N/A 0.295 0.011 2.8 0.2 0.200 0.004 5.08 0.1 0.126 0.006 3.2 0.15 0.087 0.006 2.2 0.15 0.015 0.4 N/A N/A
THT Version
Standard version Narrow version
SMT Version
Gull Wings J Legs
Mounting hole layout
Standard version
View onto the component side of the PCB (top view) Narrow version
Solder pad layout
Gull Wings
View onto the component side of the PCB (top view) J Legs
O min. 0.75
Terminal assignment
Relay - top view Non-latching type, not energized condition Latching type, 1 coil reset condition
3
IM Relay
Coil Data (values at 23C)
Nominal voltage Unom Minimum voltage UI Vdc
Operate/set voltage range Maximum voltage UII Vdc
Release/ reset voltage Minimum
Nominal power consumption
Resistance
Relay code
Vdc non-latching 1 coil 1.5 3 4.5 5 6 9 12 24 latching 1 coil 1.5 3 4.5 5 6 9 12 24
Vdc
mW
W / 10 %
1.13 2.1 3.15 3.5 4.2 6.3 8.4 16.8
3.4 6.8 10.3 11.4 13.7 20.4 27.3 45.6
0.15 0.30 0.45 0.50 0.60 0.90 1.20 2.40
140 140 140 140 140 140 140 200
16 64 145 178 257 574 1028 2880
IM00 IM01 IM02 IM03 IM04 IM05 IM06 IM07
1.13 2.25 3.38 3.75 4.5 6.75 9.00 18.00
4.1 8.1 12.1 13.5 16.2 24.2 32.3 41.9
- 1.13 - 2.25 - 3.38 - 3.75 - 4.50 - 6.75 - 9.00 - 18.00
100 100 100 100 100 100 100 200
23 90 203 250 360 810 1440 2880
IM40 IM41 IM42 IM43 IM44 IM45 IM46 IM47
Further coil versions are available on request.
UI = UII =
Minimum voltage at 23 C after pre-energizing with nominal voltage without contact current Maximum continous voltage at 23
The operating voltage limits UI and UII depend on the temperature according to the formula: UI tamb = UII tamb = tamb UI tamb UII tamb kI, kII KI * UI and
23 C
KIl * UIl 23 C
= Ambient temperature = Minimum voltage at ambient temperature, tamb = Maximum voltage at ambient temperature, tamb
= Factors (dependent on temperature), see diagram
Ambient temperature tamb [C]
4
IM Relay
Contact Data
Number of contacts and type Contact assembly Contact material Limiting continuous current at max. ambient temperature Maximum switching current Maximum swichting voltage Maximum switching capacity Thermoelectric potential Initial contact resistance / measuring condition: 10 mA / 20 mV Electrical endurance at contact application 0 ( 30 mV / 10 mA) cable load open end Resistive load at 125Vdc / 0.24 A - 30 W at 220 Vdc / 0.27 A - 60 W at 250 Vac / 0.25 A - 62.5 VA at 30 Vdc / 1 A - 30 W at 30 Vdc / 2 A - 60 W Mechanical endurance UL/CSA ratings
2 changeover contacts Bifurcated contacts Palladium-ruthenium, gold-covered 2A 2A 220 Vdc 250 Vac 60 W, 62.5 VA < 10 mV < 50 mW min. 2.5 x 106 operations min. 2.0 x 106 operations min. 5 x 105 operations min. 1 x 105 operations min. 1 x 105 operations min. 5 x 105 operations min. 1 x 105 operations typ. 108 operations 30 Vdc / 2 A 220 Vdc / 0.27 A 120 Vdc / 0.5 A 250 Vac / 0.25 A
Insulation
Insulation resistance at 500 VDC Dielectric test voltage (1 min) between coil and contacts between adjacent contact sets between open contacts Surge voltage resistance according to Bellcore TR-NWT-001089 (2 / 10 ms) between coil and contacts between adjacent contact sets between open contacts according to FCC 68 (10 / 160 ms) between coil and contacts between adjacent contact sets between open contacts
Standard Version > 10 W
9
High Dielectric Version > 109 W 1800 Vrms 1800 Vrms 1500 Vrms
1800 Vrms 1000 Vrms 1000 Vrms
2500 V 1500 V 1500 V 2500 V 1500 V 1500 V
2500 V 2500 V 2500 V 2500 V 2500 V 2500 V
High Frequency Data
Capacitance between coil and contacts between adjacent contact sets between open contacts RF Characteristics Isolation at 100 / 900 MHz Insertion loss at 100 / 900 MHz V.S.W.R. at 100 / 900 MHz * High Dielectric Version C" max. 2 pF max. 2 pF max. 1 pF
- 37.0 dB / - 18.8 dB - 0.03 dB / - 0.33 dB 1.06 / 1.49
5
IM Relay
General data
Operate time at Unom typ. / max. Reset time (latching) at Unom , typ. / max. Release time without diode in parallel (non-latching), typ. / max. Release time with diode in parallel (non-latching), typ. / max. Bounce time at closing contact, typ. / max. Maximum switching rate without load Ambient temperature Thermal resistance Maximum permissible coil temperature Vibration resistance (function) Shock resistance, half sinus, 11 ms half sinus, 0.5 ms Degree of protection Needle flame test Mounting position Processing information Weight (mass) Resistance to soldering heat All data refers to 23 C unless otherwise specified.
1 ms / 3 ms 1 ms /3 ms 1 ms / 3 ms 3 ms / 5 ms 1 ms / 5 ms 50 operations/s -40 C ... +85 C < 150 K/W 125 C 20 G 10 to 1000 Hz 50 G (function) 500 G (damage) immersion cleanable, IP 67 application time 20 s, no burning and glowing any Ultrasonic cleaning is not recommended max. 0.75 g 260 C / 10 s
Recommended soldering conditions
Soldering conditions according CECC 00802
10 sec 20 - 40 sec 215 C Temperature C 180 C 130 C
external preheating
Full line: typical Dotted line: process limits
max. 245 C 215 C 180 C Temperature C ca. 40 sec
100 C
forced cooling
130 C
Full line: typical Dotted line: process limits
Time (s)
Time (s)
Vapor Phase Soldering: Temperature/Time Profile (Lead Temperature)
Infrared Soldering: Temperature/Time Profile (Lead Temperature)
6
IM Relay
Packing
Tube for THT version - 50 relays per tube, 1000 relays per box Dimensions in mm
Tape and reel for SMT version - 1'000 relays / reel, 1'000 or 5'000 relays / box
Reel dimension
7
IM Relay
Ordering Information
Relay Code
IM00GR IM00JR IM00TS IM00NS IM01GR IM01CGR IM01JR IM01TS IM01NS IM02GR IM02CGR IM02JR IM02TS IM02NS IM03GR IM03CGR IM03JR IM03TS IM03NS IM04GR IM04JR IM04TS IM04NS IM05GR IM05CGR IM05JR IM05TS IM05NS IM06GR IM06CGR IM06JR IM06TS IM06NS IM07GR IM07JR
Tyco Part Number
3-1462037-7 3-1462037-9 3-1462037-5 1-1462038-0 0-1462037-1 0-1462038-4 4-1462037-0 0-1462037-4 1-1462038-1 0-1462037-9 0-1462038-1 1-1462037-1 1-1462037-3 1-1462038-2 1-1462037-4 0-1462038-2 1-1462037-6 1-1462037-8 1-1462038-3 4-1462037-2 4-1462037-4 4-1462037-1 1-1462038-4 3-1462037-4 0-1462038-3 4-1462037-5 2-1462037-2 1-1462038-5 2-1462037-3 9-1462037-9 4-1462037-6 2-1462037-7 1-1462038-6 4-1462037-7 4-1462037-8
Relay Code
IM07TS IM07NS IM40GR IM40JR IM40TS IM40NS IM41GR IM41JR IM41TS IM41NS IM42GR IM42JR IM42TS IM42NS IM43GR IM43JR IM43TS IM43NS IM44GR IM44JR IM44TS IM44NS IM45GR IM45JR IM45TS IM45NS IM46GR IM46JR IM46TS IM46NS IM47GR IM47JR IM47TS IM47NS
Tyco Part Number
3-1462037-0 1-1462038-7 5-1462037-1 5-1462037-2 5-1462037-0 1-1462038-8 5-1462037-4 5-1462037-5 5-1462037-3 1-1462038-9 3-1462037-1 5-1462037-7 5-1462037-6 2-1462038-0 5-1462037-9 6-1462037-0 5-1462037-8 2-1462038-1 6-1462037-2 6-1462037-3 6-1462037-1 2-1462038-2 6-1462037-4 6-1462037-5 3-1462037-2 2-1462038-3 6-1462037-7 6-1462037-8 6-1462037-6 2-1462038-4 7-1462037-0 7-1462037-1 6-1462037-9 2-1462038-5
8
IM Relay
IM Relays
requirements according FCC part 68 (1,5 kV - 10 / 160 s) for both and the Bellcore requirements according GR 1089 (2,5 kV - 2 / 10 s) the MT4 only. Dimensions MT2 approx. 20 x 10 mm board space and 11 mm height, MT4 approx. 20 x15 mm board space and 11 mm height.
4th generation slim line - low profile polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 coil. Nominal voltage range from 1.5... 24 V, coil power consumption of 140... 200 mW, latching relays with 1 coil 100 mW. The IM relay is available as through hole and surface mount type (J-Legs and Gull Wings) and capable to switch loads up to 60 W/62,5 VA. Dielectric strength fulfills the Bellcore requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). The IM is CECC/ IECQ approved and certified in accordance with IEC/EN 60950 and UL1950. Dimensions approx. 10 x 6 mm board space and 5.65 mm height.
D2n Relays
P2 Relays
2nd generation non polarized 2 c/o relay for telecom and various other applications. Nominal voltage range from 3 ... 48 V, coil power consumption from 150 .... 500 mW. The D2n relay is capable to switch currents up to 3 A. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV - 10 / 160 s). Dimensions approx. 20 x10 mm board space and 11,5 mm height.
3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption 140 mW, latching relays with 1 coil 70 mW. The P2 relay is available as through hole or surface mount type and capable to switch currents up to 5 A. Dielectric strength fulfills the Bellcore requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
P1 Relays
FX Relays
Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a wide range of applications, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption 65 mW, latching relays with 1 coil 30 mW. The P1 relay is available as through hole or surface mount type and capable to switch currents up to 1 A. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV - 10 / 160 s). Dimensions approx. 13 x 7,6 mm board space and 7 mm height for THT or 8 mm height for SMT version.
3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 coil. Nominal voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high sensitive version, 140... 300 mW for the standard version, latching relays with 1 coil 100 mW. The FX2 relay is available as through hole type and capable to switch loads up to 60 W/62,5 VA. Dielectric strength fulfills the Bellcore requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). The FX2 is CECC/IECQ approved and certified in accordance with IEC/EN 60950 and UL1950. Dimensions approx. 15 x 7,5 mm board space and 10,7 mm height.
W11 Relays
Low cost, non polarized 1 c/o relay for various applications. Nominal voltage range from 3 ... 24 V, coil power consumption 450 mW, sensitive versions 200 mW. The W11 relay is capable to switch currents up to 3 A. Dielectric strength 1000 Vrms. Dimensions approx. 15,6 x 10,6 mm board space and 11,5 mm height.
Reed Relays
FT2 / FU2 Relays
3rd generation non polarized, non latching 2 c/o telecom relay with bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power consumption 200 ... 300 mW. Most sensitive 48 V relay. Available as through hole and surface mount type. Dielectric strength fulfills the Bellcore requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). The FT2/FU2 is CECC/IECQ approved and certified in accordance with IEC/EN 60950 and UL1950. Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
High sensitive, non polarized relay for telecom and various other applications, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal voltage range from 5 ... 24 V, coil power consumption 50...280 mW for 1 n/o and 125 ... 280 mW for 2 n/o or 1 c/o versions. Reedrelays are available in DIP or SIL housing and capable to switch currents up to 0,5 A. Integrated diode and/or electrostatic shield optional. Dielectric strength 1500 Vdc. Dimensions approx. 19,3 x 7 mm board space and 5 ... 7,5 mm height for DIP or 19,8 x 5 mm board space and 7,8 mm height for SIL version.
Cradle Relays
FP2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high sensitive version, 140... 300 mW for the standard version, latching relays with 1 coil 100 mW.. The FP2 relay is available as through hole type and capable to switch loads up to 30 W/62,5 VA. Dielectric strength fulfills FCC part 68 (1,5 kV - 10 / 160 s). The FP2 is CECC/IECQ approved. Dimensions approx. 14 x 9 mm board space and 5 mm height.
Extremely reliable and mature relay family of 1st generation for various signal switching applications. Available as non polarized, polarized / latching and relay with AC coil. The benefit is the possibility of combining various contact sets from 1 up to 6 poles, single and bifurcated contacts, different contact materials with a coil voltage range from 1,5 Vdc to 220 Vac. Cradle relays are available as dust protected and hermetically sealed versions, with plug in or solder terminals and are capable to switch currents up to 5 A. Forcibly guided (linked) contact sets optional. Dielectric strength 500 Vrms. Dimensions from approx. 19 x 24 to 19x35 mm board space and 30 mm height.
MT2 / MT4
nd
Other Relays
2 generation non polarized, non latching 2 c/o and 4 c/o telecom and signal relay with bifurcated contacts. Nominal voltage range from 4.5 ... 48 V, coil power consumption 150/200/300/400 and 550 mW, and 300 mW (MT4). Dielectric strength fulfills the
We offer a variety of different relay families for maintenance and replacement purposes. These relays are up to 60 years old now, such as Card Relay SN (V23030 / V23031 series), Small General Purpose Relay (V23006 series), Small Polarized Relay (V23063 ... V23067 and V23163 ... V23167 series). Accessories like sockets, hold down springs, etc. optional.
9
Tyco Electronics AXICOM Ltd. Seestrasse 295 - P.O. Box 220 CH-8804 Au-Wadenswil / Switzerland Phone +41 1 782 9111 Fax +41 1 782 9080 E-mail: axicom@tycoelectronics.com
Tyco Electronics AMP GmbH Paulsternstrasse 26 D-13629 Berlin / Germany Phone +49 30 386 38260 Fax +49 30 386 38569 E-mail: axicom@tycoelectronics.com
Tyco Electronics EC Trutnov s.r.o. Komenskeho 821 CZ-541 01 Trutnov / Czech Republic E-mail: axicom@tycoelectronics.com
10
April 2002
Rev. 3.01
Tyco Electronics Corporation POB 3608, Harrisburg, PA 17105, USA Phone +1 800-522-6752

▲Up To Search▲

Price & Availability of IM05CGR

	To Download IM05CGR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .